Locate the damage: Inflate the bouncer and inspect it carefully to find the source of the leak or damage. Look for any holes, tears, or punctures in the material.

Clean the area: Clean the damaged area with mild soap and water to remove any dirt or debris. Rinse it thoroughly and allow it to dry completely before proceeding.

Patch the hole: Use a patch kit specifically designed for inflatable bouncers. These kits usually include adhesive patches and instructions. Cut a patch slightly larger than the damaged area and round the corners for better adhesion.

Apply adhesive: Apply a thin layer of adhesive to the back of the patch and the area around the hole. Make sure to follow the instructions provided with the patch kit for specific adhesive application techniques.

Apply the patch: Carefully place the patch over the damaged area, ensuring it covers the hole completely. Press down firmly and hold it in place for a few minutes to allow the adhesive to bond.

Allow time to dry: Let the repaired area dry completely as per the instructions provided with the patch kit. This may take several hours or overnight.

Test the repair: Inflate the bouncer again and check if the repaired area holds air properly. If the repair is successful and there are no leaks, you can use the bouncer as usual.